Key Takeaways
- Gather the necessary supplies and equipment for a complete and effective routine on how to clean roller blinds.
- Discover the best ways below to perform a quick touch-up to maintain dust-free, immaculate blinds with minimal effort.
- Scroll down and learn how to deep clean roller blinds to restore their original appeal.
How to clean roller blinds?
Tools & Materials Needed
- Warm Water
- Vacuum with Hose Attachment
- Clean Towel or Sponge
- Brush
- Mild Dish Soap
- Bathtub
- Drying Rack
A Step-by-Step Guide to Regular Cleaning for Roller Blinds
Vacuuming roller blinds on occasion is advisable to avoid dust accumulation. Although using a duster is also beneficial, a vacuum works better at removing dust particles from the fabric of roller blinds. When they begin to show dust, you may vacuum them every few weeks or incorporate them into your regular cleaning routine.
Adhere to these steps on how to clean roller blinds:
Step 1: Check the material of the roller blinds
If your roller blinds are waterproof, wipe them with a moist cloth. Alternatively, use your vacuum’s brush attachment.
Step 2: Put the blinds down and fully extend them
Depending on how long your blinds are, you might need to extend them beyond what you usually do to ensure you can see the full swath of cloth.
Cleaning the part of your blinds frequently in contact with the room may seem the easiest. However, doing so might eventually cause the blinds to get discolored.
Put the roller blinds down
Step 3: Remove dust and dirt
Dust and debris can accumulate on roller blinds, and occasionally, even tiny insects! Wiping them down takes significantly less time if you vacuum them beforehand to remove debris.
Your vacuum is ready once you plug it in and connect the brush tool. Now, turn it on and slide the brush wand from left to right at the top, working toward the bottom.
Step 4: Mix a dishwashing detergent with lukewarm water
Make the water soapy by adding 1 tablespoon (15 mL) of soap and 4 cups (950 mL) of water in a bowl while whisking or stirring it. Afterwards, place the bowl on your roller blinds somewhere out of the way but within reach.
Step 5: Wet a towel or sponge and wring it out
Make sure that the towel or sponge you use is soaked well in the solution and then wrung out so it does not drip with too much water. If your towel or sponge is overly wet, it may pull down your curtains when cleaning them, thus making your floor wet.
Step 6: Wipe the blinds
Wipe the blind from one side to the opposite side in a downward motion, then continue cleaning and moving down until you reach the bottom. If you encounter any significant stains, wash that area a little more.
Use a towel to wipe the blinds
Step 7: Rinse out your towel or sponge a few times
Dip your towel or sponge back into the soapy water and swirl it around several times to remove any collected dirt. Now, wring it out again before proceeding to wipe down the blinds.
If your rag becomes unusually dirty and doesn’t come clean when you rinse it, change it for a new one.
Step 8: Remove the tough stain
How do you clean roller blinds with stubborn stains that don’t come off easily? Simply apply the stain remover to the blemish according to the manufacturer’s instructions. Gently scrub with an old toothbrush and use a towel dipped in warm, soapy water.
Step 9: Let the blinds dry
Since you didn’t soak the roller blinds with water, they only take several hours to dry thoroughly. Remember that rolling your roller blinds up while damp can grow nasty and moldy; therefore, it is best to keep them wholly extended overnight. You may allow them to retract again after they have dried.
A Step-by-Step Guide to Deep Cleaning for Roller Blinds
Roller blinds may block undesired light, come in various colors, and are highly versatile. However, like anything else in a house, they will gather dust and dirt. Your blinds may become soiled over time by splashed food, household dust, and even minor bugs.
You might be curious about how to clean roller blinds without harming the fabric. Keep reading to learn how to clean your roller blinds thoroughly.
Step 1: Detach the roller blinds from the windows
The roller blinds should be fully extended and unrolled to their maximum length. Next, put them on the ground in a large room or a corridor. Try to keep them out of the way of animals or people coming around. If the area where you place the blinds is too small, fold them accordion-style on the ground.
Step 2: Clean up dirt and dust
You can use the brush attachment on your vacuum to get rid of dust and debris. Start at one end and move the attachment back and forth, working your way down until the entire surface of the blinds is cleaned.
Unless you have a brush attachment, wipe the blinds down with a dry cloth and use a clean hand towel to remove as much dust as possible.
Step 3: Prepare the bathtub
Prepare the bathtub
Before washing your roller blinds, you should wash out your bathtub first so that no dirt or dust will fall onto your blinds. To ensure that the blinds do not leave scratches or deformations on the bathtub, put a towel or non-skid pad at the bottom of the bathtub.
Fill half of the bathtub with lukewarm water and add 2-3 teaspoons of a mild dishwashing detergent to the village of dirt, grime or other marking on your blinds.
Step 4: Soak the blinds
Lower the roller blinds fabric only carefully into the tub’s flat surface and ensure they are completely submerged in warm, soapy water. Gently agitate them to let the soapy water in and remove any buildup of residue or debris. To guarantee excellent cleaning, ensure the blinds are fully extended and not overlapping.
An approximate 5-10 -minute soak period is usually sufficient. This enables the warm, soapy water to work, soaking up the grime and making cleanup easy.
Step 5: Scrub the blinds
Get your soft brush or sponge to scrub the roller blinds gently and go down gradually, starting from one side and working your way to the other. Make mild sweeping motions to eliminate any remaining pieces of residue or debris. Pay extra attention to places with noticeable stains or heavy dust buildup.
Step 6: Rinse the blinds
Let the sudsy water drain entirely, leaving the blinds in the bathtub. Additionally, rinse the blinds with a shower sprayer or fill a bathtub with clean water and rinse until the suds are gone. It is critical to thoroughly rinse the roller blinds since soap residue can collect dust and debris, resulting in further buildup.
Step 7: Dry the blinds
Remove the blinds from the water and shake gently to eliminate any leftover moisture. After that, place them on a clean, dry surface and use a towel to remove any remaining water droplets for a streak-free look.
You should position the blinds in an area with adequate ventilation or use a drying rack to allow them to dry naturally.
Furthermore, the blinds may dry in two to three hours, depending on the material utilized. Therefore, ensure they are dry and devoid of any apparent moisture before you hang them back up.
Step 8: Hang the blinds back up
How to clean roller blinds? When the roller blinds are fully dry, it’s time to hand them back up. Now, you have blinds that are free of dust and dirt.
Finish cleaning roller blinds
Get ready to upgrade your window coverings? Although it takes a lot of time and work, the cleaning process is straightforward. However, if you want assistance with roller blinds or want them installed in your home, please get in touch with Creative Windows. We are devoted to supporting you at every level, from unique design concepts to in-house fabrication and installation, to maximize the use of your roller blinds.
